DeXlan Chassis RM21400 User Manual

RM21400 Chassis Installation Reference Guide Chenbro Micom CO., LTD. 15Fl., No. 150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwa

3. Fasten the screws to fix the SCSI backplane assembly. 4. Push the HDD drawers back to drive trays. Chenbro Micom CO., LTD. 15Fl., No. 150, Ji

2.5 Connect LED and switch wires There is one 2 x 9 pin connector on left-bottom side on SC SI backplane. This connector provides several LED and sw

4. Check the pin number of “Fail LED” connector. Pin 1 Device 1 Power LED - Pin 2 Device 1 Power LED + Pin 3 Device 1 Access LED + Pin 4 De

7. Check the pin numbers of HDD LED connectors. Pin 1 Device 1 Power LED - Pin 2 Device 1 Power LED + Pin 3 Device 1 Access LED + Pin 4 Devic

9. Plug the LED with red wire to the lowest LED len. 10. Plug the green LED with green wire to the second lowest LED len. Chenbro Micom CO., LTD

11. Repeat step 9 & 10 till all LED are installed properly. 12. Use the same way to install the LED on another SCSI backplane. Till now, the i

14. Plug the power connectors for another SCSI backplane. 15. Attach the SCSI cable to the unused SCSI connector. 2.6 Reattach the fan bracket a

2. Reattach the fan bracket and arrange the cables properly. 3. Fasten the screws that are detached in section 2.2. 4. Put the top cover back and

Copyright This document is copyrighted, 2002, by Chenbro Micom Co., Ltd. and all rights are reserved. Chenbro Micom Co., Ltd. reserves the right to ma

Table of Contents Chapter 1 General Information...4 1.1 Specification...

Chapter 1 General Information 1.1 Specification Model Name RM214 Standard EIA-RS310D M/B Form Factor ATX/Extended ATX CPU Support DP Xeon/AMD Athl

- Compliance with Dual Intel Xeon or Dual AMD MP Server boards  Validated Thermal Solution - Optional 4cm fan on rear panel for pulling out heated

Chapter 2 SCSI Backplane Installation 2.1 Remove the top cover 1 Remove three screws on top cover. 2 Push top cover backward and life off the top c

2.3 Remove the HDD drawer 1 Push the blue door lock to right-hand side; the handle will be release automatically. 21Chenbro Micom CO., LTD. 15Fl.

2 13 Repeat the same operation for the other 5 drawers. 4 Rear view of HDD trays. 2.4 Install the SCSI backplane assembly 1. Insert the SCSI ba

2. Check whether the SCSI bracket assembly is installed properly. Chenbro Micom CO., LTD. 15Fl., No. 150, Jian Yi Road, Chung Ho City, Taipei Hs